Interfacial structure and electrical properties of LaAlO3 gate dielectric films on Si by metalorganic chemical vapor deposition

LaAlO₃ (LAO) gate dielectric films were deposited on Si substrates by low-pressure metalorganic chemical vapor deposition. The interfacial structure and composition distribution were investigated by high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), secondary-ion mass spectroscopy (SIMS), and Auger-electron spectroscopy (AES). HRTEM confirms that there exists an interfacial layer between LAO and Si in most samples. AES, SIMS, and XPS analyses indicate that the interfacial layer is compositionally graded La–Al silicate and the Al element is severely deficient close to the Si surface. Electrical properties of LAO films were evaluated. No evident difference in electrical properties between samples with and without native SiO₂ layers was observed. The electrical properties are discussed in terms of LAO growth mechanisms, in relation to the interfacial structure. PACS 73.40.Qv; 81.15.Gh; 77.55.+f; 68.35.-p     

一个推广的Hardy-Hilbert型不等式及其逆式

本文引入单参数λ及应用Beta函数,给一个Hardy-Hilbert型不等式以具有最佳常数因子的推广,作为应用,给出了它的逆向形式．     

激光打孔对氮化铝绝缘性能的影响

氮化铝陶瓷具有优良的绝缘和导热性能,是传导冷却超导电力装置绝缘与导热连接件的首选,激光切割是对其进行加工的最有效方法,但激光切割可能对其绝缘性能产生影响,进而影响超导电力装置的安全运行。基于此,通过对激光打孔前后氮化铝基片孔周区域绝缘电阻的测量、金相结构和扫描电镜成分的比较,分析了激光打孔对氮化铝绝缘性能的影响,并总结了选用氮化铝基片作为超导电力装置电流引线的绝缘与导热垫片应注意的问题。     

Transverse Effects in Slow Light Propagation

The effect of finite control beam on the transverse spatial profile of the slow light propagation in an electromagnetically induced transparency medium is studied. From the second-order wave equation and linear response of an EIT medium to the signal field, we find it is possible to produce an effective waveguide for the signal field. The existence and properties of a set of localized, stationary transverse modes are demonstrated. Especially, by carefully manipulating the profile of the control beam, we can realize single-mode propagation for the signal field, which may be important for potential applications.     

Implementation of a Nonzero-order Joint Transform Correlator Using Interferometric Technique

The implementation of a nonzero-order joint transform correlator using the double port Mach-Zehnder interferometric technique is proposed and demonstrated. This approach provides on-line processing for directly removing the zero-order components of a joint power spectrum in one step and performs the nonzero-order optical correlation. Experimental results are presented and discussed.     

液体可视图象序列中杂质小目标的检测方法

在分析红外图象和视图象差异的基础上，研究了一种适用于可视图像序列的运动小目标检测算法。受目标影响的象素点具有较弱的时间相关性，即相对普通象素点有较大的时间方差，根据此特征，用管道更新的方法产生新方差图象序列，再用管道更新的方法累积，增加信噪比，然后用基于统计均值的自适应门限方法分割出目标，最后将原图象的梯度倒数作为象素点强度的加权，有效地抑制灰度突变边界的传感器噪音，保存目标点。     

Biphotonic recording effect of polarization gratings based on dye-doped liquid crystal films

This study investigates a holographic recording effect of biphotonic polarization gratings (BPGs) written on dye-doped liquid crystal (DDLC) films. One linearly polarized green light (λ_G = 514.5 nm) and a polarization-modulated interference pattern formed by two mutually coherent orthogonal (±45° with respect to the polarization of the green light) polarized red lights simultaneously excite the DDLC films to generate a BPG. The formation of BPGs depends primarily on the dichroism of the dye molecules and a sequence of mechanisms: photoisomerization, anisotropic adsorption and inhibition of dye adsorption. The cis-isomer absorbance-modulated distribution associated with the red polarization-modulation pattern induces the dye adsorption-modulated pattern, in turn, yielding the permanent BPG which generates a modulated twisted nematic (TN) structure pattern in the sample. It is found that each BPG is verified to be electrically switchable and thermally erasable. The switching time is in the order of milliseconds. Additionally, the recording time to form a BPG decreases with increasing intensity of the green pump beam.     

LD Pump Single-Longitudinal-Mode Nd：GdVO4/RTP Solid-State Green Laser

The single-longitudinal-mode Nd：GdVO4/RTiOPO4 （RTP） solid-state Green laser operation of a laser-diode （LD） end-pumped laser is realized by multi-cavities and a Brewster plate. The LD-pumped single-frequency green laser has been demonstrated by optimizing several parameters and a cavity length, with precise temperature controlling of Nd：GdV04, RTP and laser diode. When the incident pump power is 2 W at 808.4 nm, a single-frequency cw green laser at 532nm with output 210 m W is obtained, the optical-to-optical conversion efficiency is up to 10.5%.